OmniSTAR Subscription Activation Setup

TRIMBLE AG132 Nav. version 1.30

From the HOME SCREEN press the RIGHT ARROW key until you access the CONFIGURATION screen.
Press DOWN ARROW key to enter these screens
Press RIGHT ARROW key until you access the DGPS CONFIGURATION screen.
Press DOWN ARROW key until DGPS SOURCE screen appears.
Choose SATELLITE ONLY
Press ENTER key
Press DOWN ARROW key until EZ SAT: screen appears.
Use arrow keys to set provider to OMNI
Press ENTER key
Use arrow keys to choose the correct satellite for your area.
Press ENTER key
Press DOWN ARROW key until SATELLITE FREQ screen appears.
This will list the frequency of the DGPS satellite you specified in the EZ SAT: field. Press DOWN ARROW key until SATELLITE BAUD RATE screen appears.
This should update to the Data Rate of the satellite you specified in the EZ SAT: field. Press DOWN ARROW key until prompted to exit DGPS CONFIG. screen.
Press ENTER key to exit.

OmniStar MUST THEN SEND AN ACTIVATION CODE (RSOC-Type) OVER THE SATELLITE TO THE UNIT. WHEN RECEIVED, IT WILL DISPLAY RESET BY OMNI ACTIVATION, PLEASE HIT ENTER TO CONTINUE. IT CAN TAKE UP TO 30 MINUTES FOR ACTIVATION TO BE COMPLETE. IT IS IMPORTANT THAT THE SYSTEM BE LEFT ON UNTIL THE RECEIVER POSITIONS DIFFERENTIALLY.

To check that activation was successful:

From the HOME SCREEN press the RIGHT ARROW key until you access the STATUS screen.
Press DOWN ARROW key to enter these screens
Use RIGHT ARROW key, access the DGPS SCREEN
Press DOWN ARROW key.
First screen should display Satellite frequency and S/N of the satellite signal-noise ratio and the strength of the differential satellite lock.
Press DOWN ARROW key and screen should display Omni as SERVICE PROVIDER.
Press DOWN ARROW key and DGPS DATA SOURCE should read correct REFERENCE STATION ID.
Press DOWN ARROW key and screen should display AGE of DGPS and AGE of SYNC.
Press DOWN ARROW key until Omni*SERVICE INFO appears
Press ENTER key to access this screen.
Use ENTER key to scroll through the screens for status of the OmniStar subscription activation noting USER ENABLED and STOP DATE.
Use ARROW keys to display HOME SCREEN.

The HOME SCREEN will display on the top line, the type of position recorded. THE letter G will be replaced as a D when the receiver starts computing differentially corrected positions. The second line should display the DGPS satellite frequency.